Printer Character Set; Printer Hardware - Jetter EBELT BEST Series Programming Manual

Page: 18

6.1 Printer Character Set

The text memory contents is sent to the printer
unchanged. This means that the presetting
(*CPM/*IBM) applies only to the display. If text
variables are printed, the characters between
20h and 9Fh are permitted. The characters

6.2 Printer Hardware

Any printers with RS232-interfaces can be
used. The baud rate is 9600. The printer must
Programming the Operating Panel Editon 2/94
from 20h to 7Fh can be used as reference
characters for the second character set. The
user-defined characters of the 2
are printed in the IBM graphics mode. A
suitable printer must therefore be used.
be capable of temporarily storing 2 characters
after the handshake line is deactivated.
nd
character set