Sony KP 53V85 Service Manual page 20

KP-48V85/53V85/61V85
RM-Y905 RM-Y905 RM-Y905
Using Your New Projection TV (continued)
Watching Two Programs at One Time — PIP
The symbol "b" or "B"
The symbol "≥"
indicates which picture's
indicates which
TV channel or input
picture's sound is being
source can be changed.
received.
6
Main
picture
10
Window
picture
z
Tip
If you press RESET in PIP mode, the window picture
will move to the bottom right (factory-preset location).
28
Using the Yellow Labeled Buttons for PIP Operations
CH
-
0 9
or or
and ENTER
(white labeled button)
ANT Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol "b" (or "B") is displayed.
(white labeled
button)
Press to alternate sound between the main picture and the window picture. The
AUDIO
symbol "
INDEX
received.
This is useful when you need to copy down information of the main picture.
Press to freeze the desired scene in the main picture. The frozen picture is displayed
in the window picture while viewing the normal picture in the main picture. The
FREEZE
GUIDE
window picture size is automatically changed to 1/4 if it was 1/9 or 1/16.
Press again to resume normal PIP viewing.
Press to switch the audio and video of the main picture and the window picture.
SWAP
Each time you press SWAP, the picture and sound of the two will be exchanged.
(under the cover)
(under the cover)
TV channel or input-
source mode for the
main picture* (yellow-
green-colored)
TV channel or input-
source mode for the
window picture*
(white-colored)
(white labeled
button)
(white labeled
button)
Press to select the TV channel on which the symbol "b" is
displayed. (for details, see "Watching the TV" on page 25)
JUMP
Speed Surf
1 Press and hold CH + or – to change the channel number rapidly.
2 Release to display the desired channel.
" will appear for a few seconds to indicate which picture's sound is being
Using the Yellow Labeled Buttons for PIP Operations
Press to display a window picture.
Each time you press this button, the picture size will change
(1/4 n1/9 n1/16 nno display).
To close the window picture, press
Press to change the location of the window picture (counterclockwise)
POSITION
around the main picture.
Press to select either the main or window picture in order to change the
ACTIVE
TV channel or video source using the white labeled buttons below. The
symbol "b" (or "B") will appear to indicate which picture's channel or input
mode can be changed.
To change the location of the window picture, move the joystick in any
direction and release it when the picture is in the desired location.
TV/VIDEO
Press repeatedly to scroll through the available video inputs for the
picture on which the symbol "b" (or "B") is displayed. (see "TV/VIDEO" on
page 26)
– 20 –
repeatedly until it disappears.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Note:
29