Using The Timer Menu - Sony KP 53V85 Service Manual

KP-48V85/53V85/61V85
RM-Y905 RM-Y905 RM-Y905
Adjusting Your SET UP (menus) (continued)
Speaker On: Select to listen to the sound from the projection TV speakers alone.
Off: Select to turn off the projection TV speakers and listen to the
Custom selection
of audio output
SAVA SP: Select to turn off the projection TV speakers and listen to the projection
source
Center: Select to use the projection TV as center speaker when you connect an
"Audio Out" can only be set when "Speaker" is set to "Off."
Audio Out
Fixed: Sound output is held at a fixed level through the audio system.
Easy control of
volume adjustment
Variable: Sound output varies according to the TV settings.
"SAVA SP Control" can only be set when Sony SAVA speaker system is
SAVA SP Control
connected to the AUDIO (VAR/FIX) OUT connectors and "Speaker" is set to
Controls Sony
"SAVA SP." (see "Speaker" above)
SAVA speaker's
You can also adjust the SAVA speaker's volume using VOL +/– of the projection
mode.
TV's remote control.
Surround Mode: Select to activate the SAVA Speaker's surround mode.
Super Woofer Mode: Select to activate the SAVA Speaker's super woofer mode.
36

Using the Timer Menu

T i m e r
D a y l i g h t S a v i n g s : Y e s
C u r r e n t T i m e
O n / O f f T i m e r
ch
- - - - - : - - A M
Move Select
To select the Timer
/
Display Highlight
MENU
z
Tip
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
projection TV's sound only through an external audio system's speakers.
TV's sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, "Surround Mode," and "Super Woofer Mode" with the
projection TV's remote control. (see "SAVA SP Control" below)
amplifier with a Dolby Pro Logic decoder. (see "Connecting an amplifier that
supports Dolby Pro Logic decoder" on page 19)
Use the AV receiver's remote control to adjust the volume.
Useful when you want to use your remote control to control the output of a
separate audio system.
Daylight Savings
Automatically
adjusts the time.
Current Time
Necessary for the
Timer.
Exit MENU
On/Off Timer
Wake up or
menu: scheduled viewing.
/
Select
Spring: Select Yes to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select No at the end of Daylight Saving Time.
The current time moves back one hour.
1 Press , then move the joystick up or down until
the current day (Sun - Sat) is displayed, and press
.
2 Move the joystick up or down until the current hour
(1-12) and AM/PM is displayed, and press
3 Move the joystick up or down until the current minute
(00-59) is displayed, and press
The clock has now started. Press MENU to exit.
1 Move the joystick up or down until the desired day or
range of days (Every Sun-Sat, Every Mon-Fri,
Sunday, Monday, ....Saturday, Every Sunday,
....Every Saturday) is displayed, and press
2 Move the joystick up or down until the time (hours
and minutes) that you want the projection TV to
remain on is displayed, and then press
3 Move the joystick up or down to set the time duration (maximum of 6 hours)
and press .
4 Move the joystick up or down to select the desired channel and press
The timer is now set. The TIMER/STAND BY indicator on your projection TV
will be lit.
Press MENU to exit. To cancel your timer setting, press RESET while in the
On/Off Timer window. Performing Auto Program will erase all Timer settings.
– 24 –
C u r r e n t T i m e
– – : – – AM
– – –
.
Move Select Exit MENU
.
O n / O f f T i m e r
– – – – – –
– – : – – AM – h ch – – –
.
S u n 1 2 : 0 0 A M
Move Select Exit MENU
.
.
37