Sony KP 46WT520 Operating Instructions Manual page 20

If you have a digital cable
box, you cannot use this
connection because the
TO CONVERTER jack is not
compatible with digital
cable boxes.
Notes on Using This Connection
To Do This ...
Use the cable box
Set up the TV remote control
to operate the cable box
Activate the remote control to
operate the cable box
Prevent the accidental
switching of TV channels
Switch the TV's input
between the cable box and
cable
To connect the cable box and cable
1
Connect the cable from your cable company to the TV's
VHF/UHF jack.
2
Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
3
Use a coaxial cable to connect the cable box's output jack to the
TV's AUX jack.
4
Run Auto Program, as described in "Setting Up the Channel List"
on page 39.
Cable box
Coaxial cable
IN
3
OUT
Coaxial cable
Cable (unscrambled channels)
Do This ...
Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Program the remote control. See "Programming the Remote Control" on
pages 46-47.
Press SAT/CABLE FUNCTION.
When using the cable box, you need the TV to stay on the channel the cable
box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 67.
ANT
Press to switch back and forth between the TV's VHF/UHF and AUX
inputs.
TV
AUX
2
TO
CONVERTER
1
VHF/UHF
19