Inspection And Maintenance - KB REVO E3 Complete User Manual

C HA R GI NG Y OU R S C O O T E R
Important notes about Charging
If the green light on your charger does
not turn RED when you plug it into your
E-Scooter, it could mean you have to
check the cables to ensure you have a
proper connection; or that your E-Scooter
is already fully chaged. Push and hold
your power button next to the charging
port to check the status of your battery in
the display.
• Do not overcharge, as this will affect the
life of the battery.
• The best charging temperatures are
between 0°~35°. Extreme cold and
extreme heat will prevent your battery
from charging fully.
• Make sure to unplug your charger before
standing on or operating you E-Scooter,
as this can be very dangerous.
0 9 - E NG
• Use only the E-Scooter charger that you
received in your box.
Only the indicator light on the charger will
tell you the status of the battery during
charging.
Alternatively, the E3 E-Scooter battery can
be recharged externally by plugging the
charging cable into the charging port on
the battery.
I NS P E CTI O N A N D MA I N TEN A N CE
Your E-Scooter requires routine inspection
and maintenance. This chapter describes
maintenance steps and important
operating tips. Before you perform the
following operations, ensure the power and
charging cable is disconnected.
Inspecting and Cleaning your E-Scooter
Disconnect the charger and turn off your
E-Scooter.
Routinely check the body of the E-Scooter
and tyres for damage or excessive wear.
Avoid using water or other liquids and
cleaners on the E-Scooter for cleaning. Wet
a clean cloth with clean soapy water, rinse
the cloth thoroughly, and wipe the body of
the E-Scooter making sure that water does
not get into the power button, charging
port, the foot mats, or tyres.
1 0 - EN G
Storing your E-Scooter
Fully charge your battery before storing.
If you are storing your E-Scooter for an
extended period of time, please fully
charge your E-Scooter at least once every
three months.
If the ambient temperature of the storage
location is below 0°, please do not charge.
You must bring the E-Scooter into a
warmer environment before charging.
Check under Battery Information and
Specifications for more details.
To prevent dust from getting into your
E-Scooter, try wrapping it or sealing it with
its original packaging.
Store your E-Scooter indoors, in a dry and
suitable temperature.
Users who disassemble the E-Scooter will
forfeit their right of warranty.