Installing The Battery - KB REVO E3 Complete User Manual

I NS TAL LI N G T H E BAT T E RY U N I T
1. Press the lock button and pull the
dashboard up.
2. Align the battery groove and slowly
insert the battery. (Note: Please pay
attention to the groove direction).
1 7 - E NG
3. Tighten the battery cap.
4. Lock the dashboard to finish installing
the battery.
HO W TO RI D E Y O U R E3 E - S C OO TE R
Warning: While using your E-Scooter,
there is always a risk of falling. We highly
recommend you always wear a certified
safety helmet.
1. Turn on the E-Scooter by pressing the
Power button for 3 seconds. Check the
power level indicator.
1
2. Once the power is on, lift the kickstand,
place one foot on the deck and one foot on
the ground.
The E-Scooter is push to start so you need
to reach a minimum of 6 km/h before the
accelerator will start working. Push off
using your foot on the ground to reach a
speed of over 6 km/h.
1 8 - EN G
You can push the accelerator and when
you feel safe place both feet on the deck.
Push the accelerator button to increase the
speed of your E-Scooter.
2
Accelerator
Cruise Control
You can activate Cruise Control by
maintaining a constant speed with the use
of the accelerator. To activate, hold the
desired speed for 6 seconds (accelerator
position) until you hear a beep sound, then
release the accelerator.
Applying the brake or pushing the
accelerator will disable the Cruise Control.