Charging Your E-Scooter - KB REVO E3 Complete User Manual

B AT TE RY I N FO R MAT IO N
• Do not attempt to modify, change, or
replace your battery.
• Do not use your E-Scooter if the battery
begins to emit odor, overheats, or
begins to leak.
• Do not touch any leaking materials, or
inhale fumes emitted.
• Do not allow children and animals to
touch the battery.
• The battery contains dangerous
substances, do not open the battery, or
insert anything into the battery.
• Please only use the charger provided
with the E-Scooter.
• Do not attempt to charge the E-Scooter
if the battery has discharged or emitted
any substances. In that case, the battery
should be abandoned for safety.
0 7 - E NG
• Please follow all local, state and federal
laws in regards to recycling, handling
and disposing of Lithium Ion batteries.
• The E-Scooter should only be shipped
in its original packaging.
• Do not throw away your box as you
will need your E-Scooter packaging for
future use.
CH A RGI N G Y O UR E - S C OO TER O R BATTERY UN I T
You can choose to either charge your
battery while in the E-Scooter or remove
your battery from the E-Scooter to charge
in another location.
Step 1: Ensure that the charging port is
clean and dry.
Step 2: Plug the charger into the power
socket, then connect the cable with the
power supply (100V 240V; 50,60Hz), make
sure the light on the charger lights up.

Charging your E-Scooter

0 8 - EN G
Step 3: Put the DC connector plug into the
charging port of the E-Scooter or Battery
Unit. The indicator light on the charger
should change to RED, indicating that your
E-Scooter is now being charged. When the
RED indicator light on your charger turns
to GREEN then your E-Scooter or Battery
Unit is fully charged. A full charge typically
occurs within 3 hours.
Charging your Battery Unit
Step 4: Please unplug the charger from
your E-Scooter or battery and from
the power outlet when you are finished
charging.
Charging Battery
Port Interface