Table of Contents
Advertisement
3 Drive a screw into the wall.
≥ Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at least 200 mm of space above of the main unit to allow enough space for fitting the main unit.
≥ Be sure to use a level to ensure that both mounting holes are level to each other.
Front view (semi-transparent image)
H 700 mm
K 8 mm
4 Fit the main unit securely onto the screw(s).
5 Secure the cord to the wall.
≥ Make sure that the slack of the cord is minimal.
A Screw eye
B Cord
I 175 mm
L 89 mm
DO
≥ Move the speaker so
that the screw is in
this position.
C At least 30 mm
D ‰4.0 mm
E ‰7.0 mm to ‰9.4 mm
F Wall or pillar
G 2.5 mm to 4.5 mm
J 175 mm
M Wall mounting hole
DO NOT
≥ In this position, the
speaker will likely fall
if moved to the left or
right.
15
TQBM0479
Hide quick links:
Advertisement
Table of Contents
