Advertisement
Notes on the LCD
Projection
TV
_b
_}_%_
C/_
¸_ _:}iC_eS
:
Be sure not to allow sunlight or light from a lamp to shine directly onto
the screen.
:
The screen surface is easily scratched. Do not rub, touch, or tap it with a
sharp or abrasive object (see "Use of the Cleaning Cloth" below).
?
:
If your LCD projection TV is transported directly from a cold to a warm
location, is placed in a humid room, or if the room temperature changes
suddenly, the picture may be blurred or show poor color. This is
because moisture has condensed on the lenses inside. If this happens,
leave the power on and let the moisture evaporate before using your
LCD projection TV.
Wh:
a
:
Turn off the main power on the front of your LCD projection TV before
going to sleep or going out. Disconnect the AC plug if idle for more
than 7 days.
:
Be sure to turn off the power switch on the main unit or on the remote
control. After turning off the power, the fan will continue to blow for
about two minutes. Be sure to wait for several minutes after turning the
power off when unplugging from the outlet or switching the breaker off.
: } ;?
:
Disconnect
the connections.
Use of the Cleaning
Cloth
To remove dust from the front of the screen, wipe with the supplied Cleaning
Cloth.
4% Do not use any type of abrasive pad, alkaline cleaner,scouring powder,
window cleaners or solvent such as alcohol or benzene.Otherwise, this
type of contact may result in a damaged screen.
4% To clean the screen, pleaseuse the supplied CleaningCloth lightly
moistened with water diluted mild detergent solution. Do not apply heavy
press when cleaning.
4% The supplied CleaningCloth is washable with warm water and a mild
detergent solution, and can be used repeatedly.
12
Advertisement
