Labelling And Selecting The Screen Format Of Input Sources - Sony Grand Wega KF-50SX100K Instruction Manual

Menu System

Labelling and Selecting the screen format of Input Sources

This function enables you to select the size of the picture coming from the input source as well as designate a name to the optional
equipment you have connected to the sockets of this set. This name can contain up to 5 characters (letters or numbers).
TV
VIDEO
1 2 3
4 5 6
7 8 9
0
PROGR
MENU
RM 903
S
22
Menu System
1
Press the MENU button on the remote control to display the menu
on the screen.
2
Push the joystick to $ to select the
enter the Set Up menu.
3
Push the joystick to $ or 4 to select AV Preset, then push to z.
4
Push the joystick to $ or 4 to select the input source. Then push to z .
5
Push the joystick to $ or 4 to select:
$ Off
(size of picture is not automatically adjusted).
Normal (size of picture is automatically adjusted according to the
broadcaster information).
4 Full
(The set automatically adjusts the picture size to eliminate
any dark areas on the TV picture (as shown on the section
"Changing the Screen Format").
Next push to z .
6
With the first element of the LABEL column highlighted, push the
joystick to $ or 4 to select a letter, number, "+" or blank;
then push to z to confirm this character. Select the other four
characters in the same way.
7
After selecting all the characters, press the OK button.
8
Repeat steps 4 to 7 if you wish to select the picture size or label other
input sources.
9
Press the MENU button to exit and return to the normal TV screen.
Whenever the equipment with the labeled input is selected for use, the name
appears for a few seconds on the screen
symbol, then push to z to
Picture Adjustment
Picture Mode Personal
Contrast
Brightness
Colour
Sharpness
Reset
AI
On
Noise Reduction
Off
Colour Tone Normal
Select: Enter Menu:
Set Up
Auto Tuning Start
Programme Sorting
- - - - - - -
Select NexTView
AV Preset
Manual Set Up
Select: Start Auto Tuning
Set Up
Auto Tuning
Programme Sorting
- - - - - - -
Select NexTView
AV Preset
Manual Set Up
Select: Enter:
AV Preset
INPUT AUTO FORMAT LABEL
AV1 Off VIDEO
AV2 Off
AV3 Normal VIDEO
AV4 Full VIDEO
Select: Enter:
AV Preset
INPUT AUTO FORMAT LABEL
AV1 Off VIDEO
AV2 Off
AV3 Normal VIDEO
AV4 Full VIDEO
Select: Next: Confirm: OK
AV Preset
INPUT AUTO FORMAT LABEL
AV1 Off IDEO
Off
AV2 V
AV3 Normal VIDEO
AV4 Normal VIDEO
Select A-Z, 0-9: Confirm: OK