Sony UP-2100 Operating Instructions Manual page 68

Setting Up the Printer (continued)
68
Installation and Adjustment
7
Select the function that you want to
assign to the remote control unit
connected to the REMOTE 2 connector
by pressing the ı or ∫ button.
Items to be selected
PRINT
C & PRINT (CAPTURE & PRINT)
CYCLIC-C (CYCLIC CAPTURE)
CAP-STOP (CAPTURE STOP)
BACK-SP (CAPTURE BACK)
+
POINTER
STOP
CAP/SRC (CAPTURE/SOURCE)
PRINT & PAGE
SRC & CAP
(SOURCE & CAPTURE)
8
Press the MENU button.
The regular screen appears.
FU NC T I ON S E T UP CO L OR n n n
P R N SE T UP
A U T O L I V E
I MME D . C A P.
R M 2 F U NC
C L E A R
Q 1 A
Switch the desired function to green
by pressing the ◊ or √ button.
When > is displayed, another function
can be selected by pressing the ∫
button.
When < and > are displayed, another
function can be selected by pressing
either the ı or ∫ button.
Operation
Printing whenever you press the switch.
Capturing an image to a memory page and printing a memory
image. If you press the switch while printing is being performed,
the selected image is queued, with the queued image being
printed once printing has been completed.
Capturing images to memory pages cyclically whenever you
press the switch. The printer continues to capture images,
replacing that previously stored with a new one.
Capturing images to a memory page. Once images have been
captured to all the memory pages, the printer stops storing
images and the message HIT ANY KEY appears.
The pointer (green ) returns to its former position whenever you
press the switch.
The pointer (green ) moves to the next position whenever you
press the switch.
Stopping printing whenever you press the switch. An paper
which is currently being printed will be ejected.
When the source image is displayed, the image is captured to
memory whenever you press the switch. When the memory
image is displayed, the source image appears whenever you
press the switch.
Starting to print when you press the switch if the image has
been captured in the memory, and at the same time moving to
the next memory page.
If the image has not been captured in the memory page, the
printer does not work correctly when you press the switch of the
remote control unit.
When you press and hold down the switch of the remote
conttrol unit, the source image appears on the monitor screen
and captures the image at the instant you release the switch.
PRE SS
OF F / ON
OF F / ON
P R I N T /
A L L /
1 S