Hitachi C 7UR Service Manual page 3

2. Removal of the lower guard
(1) Remove the two Seal Lock Flat Hd. Screws M4 x 10 [10]{10}, then remove the Bearing Cover [9]{9}.
(2) Remove the hook of the Return Spring [7]{7} from the Gear Cover [26]{26} and the Lower Guard [8]{8},
then remove the Lower Guard [8]{8}, Liner [5]{5} and Washer [6]{6}.
• Removal of the lower guard
[26]{26}
3. Removal of the lever
(1) Loosen the Lever [66]{63} and remove the Retaining Ring (E-type) [58]{55}.
(2) Remove the Lever [66]{63}, Lock Nut [59]{56}, Bolt Washer M8 [60]{57}, and Bolt (Square) M8
[29]{29}.
• Removal of Lever
[60]{57}
[66]{63}
[59]{56}
[58]{55}
[7]{7}
[6]{6}
[5]{5}
-2-
[9]{9}
[8]{8}
[10]{10}
[29]{29}