Cleaning And Repainting The Rest Of The Mechanism
At this point, you have installed the new thermocouple and are ready to re-install the refrigerator.
However, take a good look at the back side. As long as you have the entire thing out and sitting
on the bench, why not consider doing a complete maintenance of the burner and heating tube
assemblies and at the same time, cleaning up some of that rust so the thing will look new again.
If you'd like to consider this option, just continue on. On the other hand, if you think everything
is clean enough and you just want to put the thing back together, then jump ahead to the next
section entitled "Putting the refrigerator back in the trailer".
21