Hyundai IONIQ PLUG-IN Hybrid 2018 Quick Reference Manual page 9

FEATURES AND CONTROLS
HOMELINK WIRELESS CONTROL SYSTEM
Standard Programming
To train most devices, follow these instructions:
1. F or the first-time programming, press and hold the two outside
®
buttons, HomeLink Channel 1 and Channel 3 buttons, until the
indicator light begins to flash (after 10 seconds). Release both
buttons. Do not hold the buttons for over 20 seconds.
2. Position the end of your hand-held transmitter 1-3in. (2-8cm)
®
away from the HomeLink
light in view.
3. Simultaneously press and hold both the HomeLink
hand-held transmitter button. DO NOT release the buttons until
step 4 has been completed.
4. While continuing to hold the buttons, the red indicator Status
LED will flash slowly and then rapidly after HomeLink
successfully trains to the frequency signal from the hand-held
transmitter. Release both buttons.
For more detailed information, please refer to your Owner's Manual, or
visit www.homelink.com or call (800) 355-3515.
12 I Quick Reference Guide
buttons while keeping the indicator
® and the
®
HYUNDAI
SUNROOF
Sliding the Sunroof
To open
Press the switch backward past
the detent to open completely.
To close
Press the switch forward past
the detent to close completely.
INTERIOR LIGHTS
2
1 1
3 4
IONIQ plug-in
Sunshade
The sunshade will open automatically
with the sunroof when the glass panel
moves.
Tilting the Sunroof
To tilt
Press the switch up.
To close
Pull the switch forward.
Front map lamp
1
Push the switch to turn the map lamp
on or off.
Front door lamp ( )
2
Lights will turn on when any door is
open.
Front door lamp ( )
3
Push the switch to turn the room lamp
on.
Front room lamp ( )
4
Push the switch to turn the room lamp
off.
Quick Reference Guide I 13