FEATURES AND CONTROLS
DRIVER POSITION MEMORY SYSTEM
NOTE:
The shift lever must be in P (Park).
Recalling
Press the desired memory button (1 or 2). The system will beep once.
DRIVER'S MAIN CONTROLS
06
I Quick Reference Guide
Storing
1. Adjust the driver's seat position,
outside rearview mirror position
and instrument panel illumination
intensity.
2. Press the SET button. The system
will beep once.
3. Press one of the memory buttons
(1 or 2) within 4 seconds.
The system will beep twice.
Side view mirror
Press the L or R button.
•
Adjust the mirror by using
•
the directional switch.
Power window lock button
Disables the power window
switches on the rear passenger
doors.
Door lock
Locks/unlocks all doors.
Window switches
Front doors power window
•
switches.
Rear doors power window
•
switches.
HYUNDAI
HIGH VOLTAGE BATTERY COOLING DUCT
CHARGING THE VEHICLE
IONIQ plug-in
The high-voltage battery cooling
duct is located on the left side of
the rear seats. Do not obstruct the
cooling duct with any objects.
1. Move the shift lever to P (Park),
turn off all switches, and turn
OFF the vehicle.
2. Press center edge of the charging
door to open the charging door.
The charging door opens only when
the vehicle door is unlocked.
3. Insert the charging connector
into the charging inlet until you
hear a clicking sound.
4. Connect the charging plug to the
electric outlet at a normal charging
station to start charging.
5. Check if the charging cable
indicator light of the high voltage
battery on the instrument cluster is
turned ON.
Quick Reference Guide I
07