Set Up Using
Covr's intuitive setup wizard will guide you through the setup process
and have your whole-home network up and running in no time.
Take the included Ethernet cable and plug one end into
one of the LAN ports on the back of your existing router
and the other into one of the ports on the side of one of
the Covr Powerline Wi-Fi Extenders.
Plug the other Covr Powerline Wi-Fi Extender into a power
socket in the location where you want to extend your whole
home network to. Wait for the second adapter to power up.
Plug the Covr Powerline Wi-Fi Extender into a power
socket. Wait for the device to power up. Once the Power,
Network, 2.4G and 5G lights have turned green, continue
to the next step.
Once the Powerline lights on both adapters have turned
green, continue to the next step.
Connect your computer to your existing router
using an Ethernet cable or Wi-Fi.
Type http://covr.local./ into a web browser and
follow the instructions to complete the setup.
The wizard will guide you through the setup
process. Click or tap
to get started and
follow the simple instructions.