Set Up Using the D-Link Wi-Fi App
Open the app and tap
Install Your Device.
model menu and tap
As this is the first time
Follow the instructions to
Set a Network Name (SSID)
you are setting up a Covr
plug in your Covr Powerline
and Password by entering
Wi-Fi Extenders and connect
them in the fields provided.
New Covr Network
your existing router. During
You should try to choose a
the menu and tap
the setup process, you should
strong password which is
place the two Covr extenders
difficult for others to guess.
close to each other. Tap
after each step until you reach
the screen in Step 5.
Set a device (admin) password for your Covr
devices. This password is used to access your
Covr network's settings through the D-Link
Wi-Fi app or web interface. This password
should be different from the Wi-Fi network
password specified in the previous step. Try to
choose a strong password which is difficult for
others to guess. You can choose for the D-Link
Wi-Fi app to remember your admin password
using the slider. Tap
Download the free D-Link Wi-Fi app
from the App Store or Google Play.
A summary page will show
Device setup is now complete. You
the device password,
can now move the second Covr
network name, and network
Powerline Extender to another
password. You should take
power outlet where you need
note of this information for
additional coverage. Note that if
future reference. Tap
after plugging in the Powerline LED
confirm these settings.
is red or not lit, this may indicate a
weak connection, and you should
try plugging the extender into
another power outlet.
A final summary will show your
network name and password. Tap
to complete the setup.
You will be asked if you want to
share these details with others. To
share device settings, tap
then select the method you wish
to use to share. Tap
if you do
not wish to share device settings.