Xpan Lens Adapter - Hasselblad X1D II 50C User Manual

ACCESSORIES
137
XPAN LE N S ADAPTE R
CP.HB.00000036.01
The XPan Lens Adapter is used to attach lenses that was made
for the XPan Camera. Available XPan lenses were 5,6/30mm,
4/45mm and 4/90mm.
Note!
XPan Lenses had no built-in shutter. Consequently, they can
only be used when the electronic shutter of the camera is
activated. See more on page 92.
Note!
You can use Focus Peaking or 100% zoom in to assist manual
focusing.
RE LEASE CORD X
CP.HB.00000242.01
The Hasselblad Release Cord X allows for remote shutter
control, helping to eliminate shake or vibration. A durable
cloth-wrapped 90cm (36 in.) cable connects to the
microphone input of the X1D II and the simple single button
operation allows photographers to keep vibration to a
minimum. Its durable metal construction combined with its
slim, ergonomic design fits comfortably in the hand. Release
Cord X comes with a small leather carry pouch.
BAT TE RY C HARG I N G HUB
CP.HB.00000397.01 (EMEA)
CP.HB.00000395.01 (United Kingdom)
CP.HB.00000392.01 (North America/Japan)
CP.HB.00000396.01 (China)
CP.HB.00000393.01 (South Korea)
CP.HB.00000394.01 (Australia/New Zealand)
Streamlining the battery charging process, the Hasselblad
Battery Charging Hub contains dual slots that support the
simultaneous charging of two batteries. An integrated USB
Type-C connector supports mains power via an included
power supply or from common external USB battery banks
(sold separately). Front-facing LEDs indicate status and
capacity when charging, or users can use the Battery Charg-
ing Hub to check battery levels simply by inserting a battery
and pressing a single button.
X1D II 50C USER GUIDE Contents www.hasselblad.com