Unit Operation - Soleus Air LX-140 NT Operating Instructions Manual

UNIT OPERATION

Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7&8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button.
4) Press the Mode button until the air conditioner mode indicator lights up on the control panel display.
5) Press the or until the desired room temperature appears on the control panel display. The tempera-
▲ ▼
ture ranges from 62˚F - 86˚F.
6) Select the desired fan speed by pressing the FAN button.
NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the low-
est setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the ex-
haust hose and window kit, and keeping direct sunlight to a minimum will also improve the cool-
ing efficiency.
NOTE: When the unit is running on air conditioning mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
Heat Mode
1) Install the exhaust hose and window kit properly (see pages 7&8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button.
4) Press the Mode button until the heat mode indicator lights up on the control panel display.
5) Press the or until the desired room temperature appears on the control panel display. The tempera-
▲ ▼
ture ranges from 62˚F - 86˚F.
6) Select the desired fan speed by pressing the FAN button.
NOTE: When the unit is running on Heat mode, the exhaust hose is required and must be vented out-
side using the supplied window kit; using the continuous drain option is not recommended.