Specification - LG 20HIZ11 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to ML-041F chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature: 25°C ± 2°C
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than
30min.
(5) Adjusting standard for this chassis is followed a special
standard.
3.General Specification
No. Item
1 LCD Module Feature

SPECIFICATION

Maker LPL
Type TFT Color LCD Module
Active Display Area 20.1 inches(510.00) duaginal
Pixel Pitch [mm] 0.6375mm(H) x 0.6375mm(V) x RGB
Electrical Interface TTL
Color Depth 8bits, 16,777,216 color
Size[mm] 450(H) x 3348.7(V) x 20(D)
Surface Treatment Glare, Hard Coating (3H)
Operating Mode Normally Black
Black Light Unit 6CCFL(6 lamps)
R/T Typ. 16ms(R.T : 7/10ms + F.T. : 18/20ms)
- 6 -
Content Remark
LPL