Service, Maintenance & Disposal; Equipment Service; Display Unit; System - GE CAS GPS Node II User Manual

10 Service, Maintenance & Disposal

10.1 Equipment Service

10.1.1 Display Unit

Clean screen surface with a clean dry soft cloth - Do not use solvents or cleaners on the screen surface!
•
Check for physical damage to screen surface.
•
Check the cable is securely connected to the d i s p l a y .
•
• Check the mounting bracket is secure – finger tighten only if loose.

10.1.2 System

• Check visually that all Nodes are in good condition and the cables (where applicable) are securely connected.
Check visually that no cables are loose or damaged.
•
Verify that the system is working correctly prior to starting the vehicle and during operations.
•

10.1.3 Scheduled System Servicing

It is recommended that the system undergo preventative scheduled maintenance and inspections. These should be
carried out by trained and authorized personnel every 6 months or 1500hrs (whichever occurs first).

10.2 Equipment Maintenance

If the system is not functioning as expected and a fault cannot be resolved, please contact your nearest authorized
representative.

10.3 Decommissioning

• Removal of the system should only be performed if authorized by the owner of the vehicle.
Removal should be performed by a qualified person.
•
All system components and wiring should be removed.
•
All vehicle wiring should be restored back to original condition.
•
Dispose or store removed system in accordance with this manual.
•

10.4 Disposal

The electronic equipment discussed in this manual must not be treated as general waste. By ensuring that this product
is disposed of correctly, you will be helping to prevent potentially negative consequences for the environment and
human health which could otherwise be caused by incorrect waste handling of this product.
The system should be disposed of in accordance with local regulations.
CAS-GPS Node II User Manual (DOCU0142)
CAS-GPS Node II User Manual
It is essential that no attempt be made to repair the equipment (other than
replacement of system components). Opening equipment enclosures should
never be attempted and will void any warranty and could compromise the safe
operation of the system. Replacing System Components will require the system
to be re-configured as per the associated installation manual to suit your
system setup.
The system contains a Lithium Ion Battery and should be disposed of in
accordance with local regulations.
Rev A Page 15 of 20