Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teknoware TKT24 series
Summary of Contents for Teknoware TKT24 series
- Page 1 TKT24series Addressable 24 V Central Battery Unit Installation and User Guide...
- Page 2 This product may only be installed or maintained by a qualified electrician. QUICK GUIDE: FRONT PANEL INDICATOR LEDs Central Battery Unit is ON Mains mode Battery mode Batteries recharging Error, see Chapter 8 for details about error codes Test(s) running...
-
Page 3: Table Of Contents
Table of Contents Product Description Manufacturer Model General Description Storage Technical Details Planning the System Installing the System Connections, Parts and Layout Commissioning Structure of the User Interface Main View Main Menu Circuit- and Luminaire Configurations History of Tests and error log Functions Settings Setting the Time... - Page 4 Warnings and Errors BATTERY ERROR BATTERY OVERVOLTAGE DEEP DISCHARGE BATTERY UNDERVOLTAGE TEMPERATURE ERROR MAINS NOT PRESENT MOSFET BROKEN + circuit board number LUMINAIRE BROKEN FUSE ERROR Mechanical Dimensions: TKT2404C Mechanical Dimensions: TKT2408C...
-
Page 5: Product Description
• Mode- and warning statuses can be communicated via. relay connections to building monitoring systems • A direct data connection to Teknoware ACM system. • All the functions of the CBU can be accessed from the LCD interface. 1.4 Storage... -
Page 6: Technical Details
1.5 Technical Details 220-240 VAC, 50/60Hz, 1~ Nominal Supply Voltage: Casing / IP Class: IP20 Output Voltage: Main supply: 24 VAC, Battery supply: 24 VDC Battery Voltage: 24 VDC Battery Recharge Time: 12 h (80 %) TKT2404C: 2 x 17 Ah Batteries: TKT2408C: 2 x 38 Ah Max Input Power... -
Page 7: Planning The System
The following, how ever, must be taken into account: • All luminaires must be addressable Teknoware 24 V luminaires. The product code must end with ..41..K, for example TWT9041WK. These type of luminaires contain the necessary electronics for the communication between the CBU and the luminaires. -
Page 8: Connections, Parts And Layout
3.1.2 Connection to Teknoware Advanced Monitoring (ACM) If you are using the Teknoware Advanced Central Monitoring (ACM) -software, you can connect the TKT24 CBU directly to the modem. Give the CBU a individual local address during commissioning. See details from Chapter 7.7.6 Local Address. - Page 9 Holes for cables For circuit cables and Wall mounting mains (also on top) Wall mounting Fuses Battery- and input fuses Data connection RS485 Connection for ACM-modem Circuit fuses 1–8 Output circuits Relay connections Relays, remote ctrl and temp. sensor Battery shelf Battery shelf Wall mounting Wall mounting...
- Page 10 Batteries 24V DC Input 220-240V AC 50/60Hz 1~ RS485-connection for ACM Temperature-sensor WORK-relay BATT-relay Remote Control ERROR-relay Output Circuits N/- Output Circuits L/+ 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Circuit Fuses 4AT...
-
Page 11: Commissioning
4. Commissioning Using the selection button: Choose an action by rotating the selection button. A short press chooses the selected action. A long press (2 sec) returns the system to previous view, and saves made changes. After the CBU is installed, make sure all the luminaires are functioning correctly. Then, set up the system by making the following settings: 1. -
Page 12: Main View
6. Main View 01.01.2018 08:00 SYSTEM OK VOLTAGE 23.3V • Visible without password. CURRENT 04.2A CHARGE • Not configured: Luminaire configuration has not beeb made yet • System OK: Luminaire configuration has been made and the system is functioning normally •... -
Page 13: Functions
7.3 Functions SELECT FUNCTION >START LUM. TEST START BATTERY TEST START CONFIGURATION Functions • Start lum. test: Starts luminaire test. When a test is running, SELECT FUNCTION Stop lum. test stops the test. >START CONFIGURATION • Start battery test: Starts a battery test. When a test is running, PRINT REPORT Stop battery test stops the test. -
Page 14: Battery Settings
7.6.1 Luminaire Test Time LUM. TEST START TIME 09:00 ˄˄ Settings > Lum. test settings > Set time • Set the time you want the luminaire test to start at by rotating the selection button • Short press of the button moves the selection to minutes •... - Page 15 • When the system is password protected, only the main view is visible without the password. This means, that checking CBU status and errors can be done without logging in. • If you forget your password, contact Teknoware Technical Service. 7.7.6 Local Address LOCAL ADDRESS 1 Settings >...
-
Page 16: Warnings And Errors
8.6 MAINS NOT PRESENT Mains is not present. If the CBU is connected to mains, check the fuses. 8.7 MOSFET BROKEN + circuit board number Circuti board transistor is faulty. Change the circuit board (available as spare part, contact Teknoware Techical Service). -
Page 17: Luminaire Broken
8.8 LUMINAIRE BROKEN One or more luminaire(s) is faulty. Check the circuit and address of the luminaire, and replace or fix the luminaire. 8.9 FUSE ERROR There are luminaires defined for a circuit, but there is no electrical load in the circuit. Check the circuit fuse. -
Page 18: Mechanical Dimensions: Tkt2404C
9. Mechanical Dimensions: TKT2404C Ø22 Ø6 Ø22... -
Page 19: Mechanical Dimensions: Tkt2408C
10. Mechanical Dimensions: TKT2408C Ø22 Ø6 Ø22... - Page 20 TKT24 Central Battery Unit, User's Guide VOT112E, R1.0 – 07.11.2018 P.O. Box 19, FI-15101 Lahti Ilmarisentie 8, FI-15200 Lahti Tel: +358 3 883 020 Fax: +358 3 883 0240 emexit@teknoware.com teknoware.com...
Need help?
Do you have a question about the TKT24 series and is the answer not in the manual?
Questions and answers