Advertisement
CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must
not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots
(ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4) The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.
Never use alcohol or solvents.
There are no serviceable parts inside.
Should you need any spare parts, please order genuine parts from your local dealer.
Please refer to the instructions under installation.
Note: All information is subject to change without prior notice.
TECHNICAL SPECIFICATIONS:
LED: 1x150w RGB
Beam angle: 60°
·Power: 180W
·Voltage: AC100V-250V 60Hz-50Hz
·Built-in scenes
·DMX control: 3/5/6 channels modes
·Master and slave control
·Size: 320x330x140mm
·Weight: 8.7kgs
Advertisement
