Advertisement
OPERATION INSTRUCTION
On LCD Display, please NOTE:
When the digit flash, that means you can select this mode and via UP/DOWN to choose. The
display shut off after 30 seconds and when press again, it will light up again when press the
buttons: UP-DOWN-UP-DOWN-ENTER.
Setting solid colors and built-in programs:
When display shows：
01.STATIC
R00G00B00
You can adjust the 4 colors brightness and via F00 to adjust the flash speed
Press ENTER button, when digit flash, you can select the built-in programs as below via
UP/DOWN.
02.CHANGE-7（7colors）
SP01-99
03.CHANGE-3（3colors）
SP01-99
04.DREAM（7colors）
SP01-99
Setting Master / Slave mode:
S L A V E
M O D E
DMX Protocol:
Press MODE button until the display shows:
DMX MODE
ADDR:001 CH:06
you can now set the desired address via UP / DOWN buttons. And also the desired channel mode
(3 , 5 & 6 channels).
F00
F00-99
F00-99
F00-99
Advertisement
