TABLE OF CONTENTS The Sterisil ® System G5 takes the existing 6 stages of water treatment found in our G4 Systems and merges Introduction them with an on-board Class A ultraviolet disinfectant and integrated smart technology. The result is the most advanced dental water treatment system in the world.
The Sterisil System G5 unit requires power to produce water. In the event of a power outage, water will still be ® dispensed but will not be replenished until power is restored.
PHASE 1: UNPACKING AND INVENTORY PHASE 2: MOUNTING AND PERIPHERAL COMPONENTS Carefully unpack the contents of the boxes. One box will include the Sterisil ® System G5. The second box will CONSIDERATIONS PRIOR TO MOUNTING contain the installation manual, warranty registration card, and assorted bags containing other needed items for installation, including mounting system for static, slides, and articulating mount.
Page 5
SLIDE MOUNT - (BAG B.3) PERIPHERAL COMPONENTS The Sterisil System G5 will come with the slides affixed in the ® correct direction for proper maintenance. Please consider the Peripheral components – No more than 50 feet from the system. orientation of the slides and affixing the slide mount to the wall mounting plate before you start.
• Start by marking the drain pipe where you intend to drill your 1/4” Ensure the source water to the Sterisil System G5 remains closed until the procedure calls for it to be turned on. ® hole. The DSV will need to be before or after the peatrap.
• Repeat this process for the chrome Dental Water Faucet. You will need to set the reminder for the appropriate interval. Please consult your Sterisil Water Compliance Specialist to confirm your replacement interval. Select the pre-filter icon, select “Replace component,” and Direct Feed System: Run handpiece water at the furthest chair from the system.
• IMPORTANT- Make sure to turn off the ball valve between uses of the Wand to prevent leakage. run the dental water (Stage 5). 7. Open all tanks to finish. 8. Cartridges can either be discarded in the trash or returned to Sterisil for recycling. For more information on our recycling program visit sterisil.com/recycle.
Page 9
10. Plug In system and wait for full power up. the liability of Sterisil to the user or any other party exceed the purchase price of the product. No action under 11. Follow the procedure from Phase 5 in the installation manual to reset the monitor.
Need help?
Do you have a question about the System G5 and is the answer not in the manual?
Questions and answers