Display Image Settings Menu - InFocus INL3149WU User Manual

USING THE MRPJECTPR
Display menu

Display image settings menu

Display Iode
There are many factory presets optimized for various types of images.
‡ Mresentation: This mode is suitable for showing in front of public in connection to the PC.
Bright: Maximum brightness from any source.
‡
‡ HDR SII.: Decodes and displays High Dynamic Range (HDR) content for the deepest blacks,
brightest whites, and vivid cinematic color using REC.2020 color gamut. This mode can be selected to
enhance non-HDR content with simulated High Dynamic Range (HDR).
‡ Cinema: Provides the best colors for watching movies.
‡ Game: Select this mode to increase brightness and decrease response time for enjoying video games.
‡ sRGB: Standardized accurate color.
DICPI SII.: For viewing monochrome medical images such as X-rays, MRIs, etc.
‡
‡ User: Saved user's settings.
‡ 3D: To experience 3D you need DLP-Link 3D glasses and video source capable of sending 3D
content.
Wall Color
Use this function to obtain an optimized screen image according to the wall color. Select between off, blackboard,
light yellow, light green, light blue, pink, and gray.
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the Sharpness of a Video or S-Video source.
Color
Adjust a Video or S-Video source from black and white to fully saturated color.
Tint
Adjust the color balance of a Video or S-Video source between red and green.
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
‡ Film: For home theater.
‡ Video: For video or TV source.
‡ Graphics: For PC / Photo source.
Standard (2.2): For standardized setting.
‡
‡ 1.8 / 2.0 / 2.4 / 2.6: For specific PC / Photo sources.
30 English