Advertisement
GLAC IER series
PH-ASDOMKT_01
PACKAGE CONTENTS
GLACIER DOMEX
QTY: 1
GLACIER Socket 3647
QTY: 1
WARNING -
This product is intended for advanced users. Improper installation may result in damage to your equipment. While all e orts have
been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s) occurring to your
components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in
the Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.
Turn o the power to your system and discharge your body's static electric charge before proceeding with the installation procedure. If you do not feel comfortable
with performing the installation procedure, consult a quali ed computer technician.
STEP 1. REMOVING STOCK VRM COOLER
Unscrew all highlighted screws to remove
the stock VRM cooler and backplate.
Make sure to unplug the LED and Fan
cables when you remove the stock cooler.
Take the EVA-Foam from the box to use
as a base for your installation process.
STEP 2. APPLYING THERMAL PADS
Clean o the original thermal compound.
We recommend using isopropanol alcohol.
Remove the protective lm and place the
thermal pads on correct position on the
PCB components.
Make sure to remove the protective lm on
both sides of the thermal pads.
DOMINUS EXTREME KIT
Thermal Pads
QTY: 4
M2.5x10 Screws
QTY: 3
M3x10 Screws
QTY: 3
INSTALLATION GUIDE V1.0
For latest version check www.Phanteks.com
Thermal Compound
PH-NDC-01
QTY: 1
CPU Block D-RGB Cable
QTY: 1
VRM Block D-RGB Cable
QTY: 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Phanteks GLACIER Series
Summary of Contents for Phanteks GLACIER Series
- Page 1 Phanteks assumes no liability expressed or implied for any damage(s) occurring to your components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in the Phanteks cooling products.
- Page 2 M2.5 STEP 4. CONNECT D-RGB LIGHTING Connect the D-RGB cable to the D-RGB strip in both water blocks. All Phanteks D-RGB products can be daisy-chained together. You can connect the D-RGB cable to the addressable header on the motherboard with the cable that is included with the motherboard.
Need help?
Do you have a question about the GLACIER Series and is the answer not in the manual?
Questions and answers