Phanteks PH-GB1080Ti_BK01 Manual

GLAC IER G1080 Ti
PH-GB1080Ti_BK01/CR01
PACKAGE CONTENTS
20x120x1.5mm (for memory IC)
10x120x1.5mm (Spare)
13x160x1.5mm (for Vdd MOSFET)
WARNING -
DISCLAIMER
- This product is intended for advanced users. Please
body's static electric charge by touching a grounded surface – for
consult with a qualified technician for installation, improper instal-
example, the metal surface of the power supply or chassis – before
lation may result in damage to your equipment. While all efforts
performing any hardware procedure. Phanteks assumes no liability
have been made to provide the most comprehensive information
for any damage, caused directly or indirectly, by improper installation
possible, Phanteks assumes no liability expressed or implied for
of any components. If you do not feel comfortable with performing
any damage(s) occurring to your components as a result of using
Phanteks cooling products, either due to mistake or omission on
our part in the below instructions, or due to failure or defect in the
*Please do not disassemble the water block. Warranty will be voided.
Phanteks cooling products.

INSTALLATION

REMOVING STOCK COOLER
OUT THE TOP EVA-FOAM LAYER FROM THE BOX OUT THE TOP EVA-FOAM LAYER FROM THE BOX
E AS BASE FOR YOUR GPU PLACEMENT. E AS BASE FOR YOUR GPU PLACEMENT.
ighlighted screws. All heat sink assembly screws should be
luding self-adhesive washers on both sides of the PCB (if present).
E TO UNPLUG THE FAN AND RGB LED CABLES WHEN YOU REMOVE THE HOUSING.
REMOVING PCBA BRACKET
e screws on the PCBA bracket.
APPLYING THERMAL COMPOUND
H4 Hex Socket Wrench needed
remains of the original thermal compound until components and
are completely clean (we recommend using a isopropanol
). Apply a light coat (see image) of the PH-NDC_01 thermal paste.
Y COAT NVIDIA GPU CHIP WITH ENCLOSED THERMAL PASTE.
MSI GAMING
INSTALLATION GUIDE
Thermal Pads
QTY: 3
Description:
Glacier G1080 Water Block
For applying on circuit board on GPU
(Nvidia GTX 1080Ti)
QTY: 1
Phanteks Plugs
QTY: 2
M2.5x5, washers
QTY: 10 (Spare 4pcs)
Washers
QTY: 8 (Spare 4pcs)
Hex Nuts
Phanteks RGB Cable for GPU
QTY: 4
QTY: 1
Phanteks RGB Cable for Phanteks case
Phanteks RGB Cable for Phanteks Case
(Option a)
QTY: 1
QTY: 1
FOUNDERS EDITION GTX 1080 Ti
Thermal Pads
QTY: 3
Description:
For applying on circuit board on GPU
Phanteks Plugs
QTY: 2
Phanteks RGB Adapter for moth-
erboard
QTY: 1
WARNING -
body's static electric charge by touching a grounded surface – for
example, the metal surface of the power supply or chassis – before
performing any hardware procedure. Phanteks assumes no liability
for any damage, caused directly or indirectly, by improper installation
of any components. If you do not feel comfortable with performing
the installation procedure, consult a qualified computer technician.
*Please do not disassemble the water block. Warranty will be voided.

STEP 1. REMOVING STOCK COOLER

Take out the top EVA-FOAM from the box to use as a base
for your GPU placement.
Remove all highlighted screws. All heat sink assembly screws should be removed, including
self-adhesive washers on both sides of the PCB (if present).
Make sure to remove the two screws located on the I/O. Keep the screws aside to use in step
5.
Unfasten the screws and use the provided H4 hex socket wrench to remove the hexagonal
spacer-screws (blue). After you remove the housing, do not forget to unplug the fan.
Make sure to keep the hexagonal spacer-screws aside for later use (Step 5).

STEP 2. APPLYING THERMAL COMPOUND

Wipe off the remains of the original thermal compound until components and circuit board are
completely clean (we recommend using a isopropanol cleaning pad). Apply a light coat (see
image) of the PH-NDC-01 thermal paste.
Lightly coat Nvidia GPU Chip with the enclosed thermal paste.
Thermal Compound (PH-NDC_01)
QTY: 1
Hex Socket Wrench
QTY: 1
Phanteks Glacier G1080
PH-GB1080MS_BK01/CR01
PACKAGE CONTENTS
Turn off the power to your system and discharge your
DISCLAIMER
have been made to provide the most comprehensive information
possible, Phanteks assumes no liability expressed or implied for
any damage(s) occurring to your components as a result of using
Phanteks cooling products, either due to mistake or omission on
our part in the below instructions, or due to failure or defect in th
Phanteks cooling products.
INSTALLATION
Glacier G1080 Water Block
(MSI GTX 1080/1070 GAMING)
QTY: 1
Thermal Compound (PH-NDC_01)
QTY: 1
M2.5x5, washers M2.5x5, washers
QTY: 20 QTY: 20
- This product is intended for advanced users. Plea
S
Rem
rem
S
Wip
Circ
clea