Vascat ID Series Operation And Maintenance Manual page 26

OPERATION AND MAINTENANCE MANUAL
ID MOTORS
PRECAUTION
If the admissible loads are exceeded for the forces on the end of the shaft, damages may occur to the mounting and the
machine. Damages may also occur to the cylindrical roller bearings when the transversal forces are lower than the established
minimum.
Observe the admissible loads according to the data given in the catalogue.
A motor may need some type of special work (considered as non-standard) that includes a bearing different to those specified
above. In said case, the customer must check with VASCAT to make sure that he has all the relevant information.
CODE: CTT52 EDITION: 03 RELEASE: APRIL 2019
Subject to technical changes without prior notice
Radial load according to speed
Figure 3: Admissible radial loads
PAGE: 26