Appendix B. Programming Messages And Codes; Return Code From The Chkpt Macro Instruction For The 3480; Abend Completion Codes Issued By Checkpoint/Restart For The 3480 - IBM 3480 User Reference

Appendix B. Programming Messages and Codes
Return Code from the CHKPT Macro Instruction for the
3480
For further information about checkpoint/restart, see Checkpoint/Restart
User's Guide.
Code
(Hex)
28
Meaning
I/O error during SYNCDEV caused by a user data set.
ABEND Completion Codes Issued
by
Checkpoint/Restart
for the 3480
Code
(Hex)
03F
33F
Meaning
(MVS/370 only) System abend code 03F indicates that a user data
set on a 3480 subsystem could not be synchronized. An I/O error
occurred while writing data from a previous channel program to
the media (deferred-write error).
(MVS/XA only) System abend code 33F indicates that a user data
set on a 3480 subsystem could not be synchronized. An I/O error
occurred while writing data from a previous channel program to
the media (deferred-write error).
ABEND Return Codes
The ABEND return codes for the following messages reflect conditions that
can occur with 3480 block count checking. See MVS/Extended Architecture
Message Library: System Messages or MVS/370 Message Library: System
Messages for the complete text of the messages and explanations of the
messages and any other return codes associated with the message.
Appendix B. Programming Messages and Codes
73