The Timer; Setting The Clock - Sony CFD-ZW150 Operating Instructions Manual

The Timer

Setting the clock

Before you set the clock, insert three size
AA (R6) batteries and connect the AC
power cord (see page 20 and 21.)
As long as the clock goes, ":" flashes.
Tip
The time display
system of this player is
the 12-hour system:
AM12:00 = midnight
PM12:00 = noon
16
The Timer
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6
CLOCK
1
Press and hold CLOCK for about 2 seconds until
"AM" or "PM" and the hour digit flash.
2
Press TIME SET +/– until you set the current hour.
Then press DISPLAY/ENTER.
The minute digits flash. Set the minutes by
pressing TIME SET +/– until the current minute is
displayed.
3
Press DISPLAY/ENTER.
The clock starts from 00 seconds.
DISPLAY/ TIME SET +/–
ENTER