Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for swepac SV 23E
Summary of Contents for swepac SV 23E
- Page 1 SV 23E ORIGINAL USER MANUAL Dok: 101514-GB 1833...
-
Page 2: Table Of Contents
SV 23E CONTENTS SAFETY INSTRUCTIONS ..............OPERATION, PRECAUTIONARY MEASURES....... 3; 4; 5; 6 TRANSPORT, PRECAUTIONARY MEASURES......TECHNICAL DATA ................SIGNS....................DESCRIPTION AND AREA OF USE..........START OF FLOOR VIBRATOR............MACHINERY OVERVIEW ..............OPERATION OF FLOOR VIBRATOR..........USE OF SUPPORT................ - Page 3 SV 23E SAFETY DIRECTIVES OPERATION, precautionary measures Dangers and risk of explosion In order to minimise the risk of serious injury or death to others or to oneself, read and understand the safety direc- If a hot machine or exhaust pipe comes into con-...
-
Page 4: Safety Instructions
SV 23E Never smoke when you are filling the fuel tank or Working in a well-ventilated area. If the machine has when you are working with the machine or per- an exhaust system, direct the exhaust fumes as must forming service on it. - Page 5 SV 23E WARNING! Projectiles Using maintain the machine is recommended in these instructions, in order to avoid unnecessary increases Faults in the working material, accessories or the in vibrations. machine can cause material to be flung outward. The following can help you to reduce exposure to...
-
Page 6: Operation, Precautionary Measures
SV 23E WARNING! Crush injury risk. TRANSPORT, PRECAUTIONARY MEASURES There is a risk that hair, clothes and closing can be WARNING! Loading and unloading, risks pulled in or caught by rotating machine parts. This When the machine is lifted by crane and similar can cause strangulation, head injury, wounds or equipment, this can lead to injury. -
Page 7: Technical Data
SV 23E TECHNICAL DATA SV 23E Flyweight motor ........1-phase 50 Hz, 230V Motor vibrator effect............350 Watt Power consumption ............1.63 Amp. RPM..............0-10 000 rpm Frequency ...............max. 167 Hz Centrifugal force ............130 kN Imperviousness..............IP 54 Weights Weight, excl straightboar............13kg Weight 1.6 m..............8.4 kg Weight 2.2 m..............11.6 kg... -
Page 8: Signs
SV 23E SIGNS Warning Signs N.B.! The composition of the signs are general for all Swepac machines. Other signs may occur depending on the model of the machine. Machine plate Before use, carefully read through the handbook and safety regulations in order to be able to handle the machine in a proper manner. -
Page 9: Description And Area Of Use
SV 23E DESCRIPTION AND AREA OF USE Swepac Floor Vibrator SV 23E is mainly intended for the vibrating and evening of slits and groutings on existing sub-flooring. It can also be used on concrete structures up to a plastic consistency. For thicker concrete layers, a floor vibrator is used in combination with rod vibrator. -
Page 10: Start Of Floor Vibrator
SV 23E START OF FLOOR VIBRATOR Connect the plug into the power outlet, 230 V, single Power plug phase. Hold the machine steady and turned the switch to the on position. The speed can be seamlessly adjusted now to the needs RPM control of the user. -
Page 11: Operation Of Floor Vibrator
SV 23E OPERATION The floor vibrator is run backward at a high speed, 0.5 – 1.0 m per minute. See the image below. Direction of pull Direction of pull If the floor vibrator leans, the vibration effect and the evenness is poor. If the straightboard leans forward and back during the work, the surface will be uneven. -
Page 12: Use Of Support
SV 23E USE OF SUPPORT The floor vibrator is equipped with the support that is used when the machine is not in operation. The supporters removed easily with a handle and it folds down into its end position. MOVING OF FLOOR VIBRATOR Use the centre handle of the handlebar for lifting for short movements. - Page 13 SV 23E CIRCUIT DIAGRAM AND OTHER ELECTRICAL INFORMATION...
-
Page 14: Notes
SV 23E NOTES... -
Page 15: Ec Declaration Of Conformity
1. Category: Rod vibrator 2. Type: SV 23E The product satisfies the following directives: 2006/42/EG 2000/14/EG 2004/108/EG EN 500-1 EN 500-4 EN 12649:2008+A1:2011 ISO 11201 ISO 5349-2:2001 Technical documentation available from: Swepac AB, Blockvägen 3, 341 32 Ljungby Hans Holmlund / Product manager... - Page 16 SWEPAC AB Address: Blockvägen 3, 341 32 Ljungby, tel. 0372-156 00, fax 0372-837 41, e-mail info@swepac.se, Internet: www.swepac.se...
Need help?
Do you have a question about the SV 23E and is the answer not in the manual?
Questions and answers