MODEL
GENERAL DESCRIPTION
The Orbinox model MU is a 4 sided sealing slide gate. The
gates are suitable for different types of applications with a
highly versatile flow control for waste water treatment
plants, irrigation, hydraulic works and hydro-electric power
plants.
From sizes 6" x 6" (150mm x 150mm) to 48" x 48"
(1200mm x 1200mm) , the MU model has a unique seal
design that can achieve minimal equal seating and
unseating (bidirectional) leakage rates. Sizes 52" x 52"
(1300mm x 1300mm) up to 80" x 80" (2000mm x
2000mm) are available in both uni-directional (only
suitable for seating water heads) and bi-directional
configurations.
The leakage rate is 50% or better of the maximum
allowable recommended by
normal conditions. Orbinox also designs and manufactures
the MU Slide Gate in larger sizes, for more demanding
service conditions and maintains a leakage rate below the
allowable standard from WW . For more information
please contact an Orbinox representative.
DESIGN CONSTRUCTION
The MU Slide Gate is manufactured in general accordance
to:
• WW C561-04
• DIN 19569
• BS 7775
The standard MU model is manufactured in stainless steel
which has a higher corrosion resistance in many
applications which results into a longer life cycle with little
or no maintenance. Other materials of construction are
available upon request, such as
stainless, etc.
ORBINOX reserves the right to change specifications without notice.
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
MU
SLIDE GATES
WW
(C561-04) under
ISI 904L, Duplex
www.orbinox.com
OBXC
06-2013
MU-1