MODEL
GENERAL DESCRIPTION
The ORBINOX model MU is a flush bottom 4 sided sealing slide
gate. The gates are suitable for different types of applications
with a highly versatile flow control for waste water treatment
plants, irrigation, hydraulic works and hydro-electric power
plants.
From sizes 6" x 6" (150mm x 150mm) to 48" x 48" (1200mm
x 1200mm), the MU model has a unique self adjusting seal
design that can achieve minimal equal seating and unseating
(bidirectional) leakage rates. Sizes 52" x 52" (1300mm x
1300mm) up to 160" x 160" (4000mm x 4000mm) are
available in both uni-directional (only suitable for seating water
heads) and bi-directional configurations.
The leakage rate is 50% or better of the maximum allowable
recommended by AWWA (C561) under normal conditions.
ORBINOX also designs and manufactures the MU Slide Gate in
larger sizes, for more demanding service conditions and
maintains a leakage rate below the allowable standard from
AWWA. For more information please contact an ORBINOX
representative.
DESIGN STANDARD
The MU Slide Gate is manufactured in general accordance with
AWWA C561
The standard MU model is manufactured in stainless steel which
has a higher corrosion resistance in many applications which
results into a longer life cycle with little or no maintenance. Other
materials of construction are available upon request, such as AISI
904L, Duplex stainless, etc.
ORBINOX reserves the right to change specifications without notice
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
MU
SLIDE GATES
www.orbinox.com
OBXC 02/19
Rev.4
MU_1