Download Print this page

Brizo VESI 6340 Installation Manual

Three handle rosette bidet valve with vacuum breaker and pop-up assembly

Advertisement

Quick Links

Models/Modelos/Modèles
6340
Collection
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely before
beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de début-
er;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
www.brizo.com
THREE HANDLE ROSETTE BIDET VALVE WITH
60904
VACUUM BREAKER AND POP-UP ASSEMBLY
VÁLVULA DE TRES MANIJAS PARA EL BIDÉ DE
BOQUILLA ROCIADORA CON ROMPEDOR DE
VACÍO Y ENSAMBLE DEL DESAGÜE AUTOMÁTICO
ROBINET À TROIS POIGNÉES POUR BIDET AVEC
AJUTAGE, CASSE-VIDE ET RENVOI MÉCANIQUE
®
®
1
T E FLO N
N
O
T
L
E
F
3/32" (2.38mm)
3/32 po (2.38mm)
3/32" (2.38mm)
3/32 po (2.38mm)
8/14/15
60904
Rev. F
Rev. F

Advertisement

loading

Summary of Contents for Brizo VESI 6340

  • Page 1 Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: T E FLO N 3/32" (2.38mm) 3/32 po (2.38mm) For easy installation of your Brizo ® faucet you will need: • To READ ALL the instructions completely before beginning.
  • Page 2 350 South Edgeware Road Indianapolis, IN 46280 St. Thomas, Ontario, Canada N5P 4L1 Componentes electrónicos y pilas (si aplicable) Todas las piezas (salvo las pilas), si hay, de esta llave de agua Brizo ® están garantizadas al con- 1-877-345-BRIZO (2749) 1-877-345-BRIZO (2749) customerservice@deltafaucet.com customerservice@mascocanada.com...
  • Page 3 RP48447▲ Diverter Handle & Set Screw Manija Desviadora y Tornillo de Ajuste Manette d’inverseur et vis de calage RP48448▲ Diverter Body Cuerpo Desviador Corps d’inverseur RP24▲ Rod Guide Assembly (Complete) Ensamble de la Barra de Guía Guide-Tirette (Complet) RP54533 Outlet Hose RP48449 Manguera de Salida Diverter Valve / Vacuum...
  • Page 4 RP44525 Installation Hardware Herramientas para la Instalación RP44521▲ Matériel pour Handle Accent l’installation Accesorio para la Manija Élément décoratif de manette RP41923▲ Handle Assembly Ensamble de la manija Poignée RP16497 Set Screw RP41924▲ Tornillo de Ajuste Handle Shroud Vis de Calage Cubierta de la manija Coiffe de la poignée RP23618...
  • Page 5 INSTALLATION OF DIVERTER VALVE/VACUUM BREAKER Note: Please refer to bidet bowl installation instructions to identify hole location for diverter valve. Hole size must be 1-1/8” diameter minimum. INSTALLATION OF ROSETTE SPRAY Assemble diverter valve (1) with “Y” and gasket (2) as shown in illustration. Slide one rubber cone Insert rosette (1) and rubber washer (2) into washer (3), with smaller tapered end pointing up, onto diverter valve all the way to the base.
  • Page 6 1/2" (12.7 mm) INSTALLATION OF VALVE ASSEMBLIES Remove shroud adapter (1) and gasket (2) from cold end valve assembly (3). MAKE CONNECTIONS TO WATER LINES: Choose hook-ups for 1/2" I.P.S. connections: Place assembly (1) through proper mounting hole from bottom. Reinstall gasket (1) Ball nose riser (3/8"...
  • Page 7 Step 3b METAL POP-UP Step 3c Remove stopper (1) and flange (2). Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal rod body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or non- removable (5).
  • Page 8: Install Handles

    FLUSH YOUR SYSTEM INSTALL HANDLES: Turn diverter handle (1) counterclockwise to ‘rim feed’ position. Turn on water supplies (2) and turn hot and cold handles (3) to open position for one minute to flush any debris from system. Thread the stem adapter (1) into the valve stem (2). Place handle shroud (3) over adapter (4) with the set Check all connections at arrows for leaks.