Receiving Beamed Information; Tips On Beaming Information - Sony CLIE PEG-NR70V/U, PEG-NR70/U Operating Instructions Manual

Beaming between your Sony CLIÉ Handheld and another Palm
®
OS PDA

Receiving beamed information

1
Turn on your CLIÉ handheld.
2
Point the IR port directly at the IR port of the other Palm OS
PDA handheld transmitting the data.
The Beam dialog box is displayed. Beaming data starts.
You can select in a dialog box the category in which you save the data.
3
Tap Yes.
The data is saved to the unfiled category.
Note
If Beam Receive in the Preferences menu is set to Off, you cannot receive data using the
beaming feature. Before beaming data, make sure to set Beam Receive to On.

Tips on beaming information

• Incoming data or application should be placed in the Unfiled category.
• Pressing the Address Book
business card.
• You can use Graffiti
and then tap
Chapter4
Communicating using your Sony CLIÉ Handheld
button for about two seconds beams your
®
writing to beam the current entry (
).
then , or
136