Printing From A Bluetooth-Compliant Device; Compliant Device; Compatible Profiles For Bluetooth Communication; Preparations: Connecting Dppa-Bt1 - Sony DPP-FP85 Operating Instructions Manual

Printing from a Bluetooth-compliant device

Printing from a Bluetooth-

compliant device

By connecting the Sony DPPA-BT1 Bluetooth
USB adaptor to the PictBridge/EXT
INTERFACE connector of your printer, you
can print an image from a Bluetooth-compliant
mobile phone, digital camera, or other device.
Notes
• Do not use the DPPA-BT1 outside the area you
purchased it. Depending on the area, the use of the
adaptor may violate the local radio wave
regulations and may be subject to penalty.
• In some regions, the Sony DPPA-BT1 Bluetooth
USB adaptor is not sold.
Compatible profiles for
Bluetooth communication
The DPP-FP85/FP95 supports the following
profiles:
• BIP (Basic Imaging Profile)
• OPP (Object Push Profile)
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is a "Profile"?
A profile consists of the standards that enable
Bluetooth wireless communication. There are
several profiles available, depending on the
purposes and product to be used. To make
Bluetooth communication possible, the devices
used in the communicated should support the
same profile.
Compatible image file formats that can
be printed
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF (4:4:4, 4:2:2, 4:2:0
formats Baseline JPEG)
TIFF: Exif 2.21 compatible
BMP: 1, 4, 8, 16, 24, 32 bit Windows format
Some image file formats are not compatible.
GB
48
Maximum number of pixels that can be
handled
8 000(H) × 6 000(V) dots (Maximum 5 MB or
less)
Preparations: connecting
DPPA-BT1
Before you start transferring an image or
printing, you need the following preparations:
1
Connect the printer to the AC power
source.
2
Press the 1 (on-standby) button to
turn on the printer.
3
Insert the Bluetooth adaptor into the
PictBridge/EXT INTERFACE
connector of your printer.
The Bluetooth printing mode window is
displayed.