Cleaning And Maintenance; Defrosting; Shipment And Repositioning - Nordmende RF4DRIXA+ User Manual

5 CLEANING AND
MAINTENANCE
Disconnect the unit from the power
supply before cleaning.
Do not wash your appliance by
pouring water on it.
Do not use abrasive products,
detergents or soaps for cleaning the
appliance. After washing, rinse with clean
water and dry carefully. When you have
finished cleaning, reconnect the plug to the
mains supply with dry hands.
• Make sure that no water enters the lamp
housing and other electrical components.
• The appliance should be cleaned
regularly using a solution of bicarbonate
of soda and lukewarm water.
• Clean the accessories separately by
hand with soap and water. Do not wash
accessories in a dish washer.
• Clean the condenser with a brush at least
twice a year. This will help you to save on
energy costs and increase productivity.
The power supply must be
disconnected during cleaning.

5.1 Defrosting

Cleaning the evaporation bowl:
Your fridge defrosts automatically. Water
produced by defrosting flows into an
evaporation container, passing through a
water collecting groove, where it vaporizes.
Replacing LED Lighting
If your appliance has LED lighting
contact the help desk as this should
be changed by authorized personnel only.
6 SHIPMENT AND
REPOSITIONING
The original packaging and foam may be
kept for re-transportation (optional).
Fasten your fridge with thick packaging,
bands or strong cords and follow the
instructions for transportation given on the
package.
Remove all movable parts (shelves,
accessories, vegetable bins, etc.) or
fix them into the fridge against shocks
using bands during re-positioning and
transportation.
An ambient sensor, main board and hinge
covers are available on your refrigerator.
During cleaning, make sure no fluid enters
this area.
Ambient sensor
The refrigerator must be carried by at
least 4 people, as in the figure.
EN - 19
Main board box
Hinge cover