Begin Using Your Remote - Hisense 40H5F Quick Setup Manual

STEP 4. Begin Using your Remote
1. Slide the back cover to open the battery compartment of the remote
control.
Gently push and slide Insert the batteries
2. Insert two AAA size batteries. Make sure to match the (+) and (-)
ends of the batteries with the (+) and ( - ) ends indicated in the
battery compartment.
3. Replace the battery compartment cover.
Important Information about the remote and batteries:
• Discard batteries in a designated disposal area. Do not throw
them into a fire.
• Remove old batteries immediately to prevent them from leaking
into the battery compartment.
• If you do not intend to use the remote control for a long time,
then remove the batteries.
• Battery chemicals can cause a rash. If the batteries leak, clean
the battery compartment with a cloth. If chemicals touch your
skin then wash it immediately.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(NiCd, NiMH, etc.) batteries.
• Do not continue using the remote if it gets warm or hot.
Call our Support Center immediately on the support website.
Remote Control Range Information
The remote control can work at a distance of up to 26 feet in front of
the TV set.
It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite Remote
Control to Operate Your New Television (only for
USA)
If you would like to program your other household remote controls
Gently push and slide
to your new television, please refer to the User's Manual supplied by
your Cable or Satellite provider. The Cable or Satellite providers' User's
Manuals should include instructions on how to program their remote
to your television.
A list of codes for the most common Cable and Satellite providers
are listed below. Use the code that is associated with your Cable or
Satellite provider (if applicable).
DIRECTV......0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780,
12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002, 12183
Time Warner Cable......386, 0178, 10178, 400, 450, 461, 456, 0748, 1463,
0463, 10463
Comcast......0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171,
11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963, 12002
Cox Communications......0178, 10178, 1326, 1463
Dish Network......505, 627, 538, 720, 659
If the code associated with your Cable or Satellite provider is not listed,
does not work or you cannot locate the instructions to program your
remote, call your local Cable or Satellite provider's customer service
center.
If your Cable or Satellite provider does not have a code available, please
contact us at one of the phone numbers on Page 1.
Using Your Cable Set-top Box or Satellite Receiver
13