Sony VGN-FS600 Series User Manual page 49

n N
49
Using Your VAIO Computer
Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you
alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not
recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer.
While the card is inserted, your computer may not enter Hibernate power management mode. It may enter Standby mode. We recommend that you remove
the card before your computer enters Hibernate mode.
Some PC Cards or their functions may not be compatible with your computer.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
If an "!" mark appears on the Device Manager tab in the System Properties window, remove the software driver and then reinstall it.
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card
in the correct direction. See the manual supplied with your PC Card for more information on use.
Do not carry your computer while touching the head of a PC Card, because pressure or shock may damage the connector pins.
You do not need to shut down your computer before inserting or removing a PC Card.