Table of Contents
Advertisement
Display
Why did the computer screen (LCD) go blank?
Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or
Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using the
Power Saving Modes
Make sure the computer is plugged into a power source and is on. The power indicator on the computer will be on if the
computer is on.
If your computer is using battery power, make sure the battery is installed properly and is charged. See Using the Battery
Pack
(page 26)
for more information.
If the display mode is set to external display, use the Fn+F7 key combination. See Combinations and Functions with the
Fn Key
(page 36)
for more information.
Why can't I view the entire DVD video display on a TV screen?
The display resolution may not be properly set. It is recommended that you adjust the display resolution to 1024 x 768 or smaller,
depending on the size of the external display screen.
How do I adjust the image on the TV screen?
Use the controls on your external display to adjust the image. See the help guide that accompanied your display for more
information.
(page 133)
for more information.
n N
189
Troubleshooting
Advertisement
Table of Contents
