Advertisement
Quick Links
Advertisement
Related Manuals for The Galley Ideal Workstation IWS 7S
Summary of Contents for The Galley Ideal Workstation IWS 7S
- Page 1 Ideal Workstations™, Workstations with DryDock™, BarStations™ and WashStations™ Installation Guide...
- Page 2 Center hole diameters 2" behind cutout Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories...
- Page 3 Center hole diameters 2" behind cutout Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories...
- Page 4 Center hole diameters 2" behind cutout Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories...
- Page 5 Center hole diameters 2" behind cutout Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories...
-
Page 6: Before You Begin
IMPORTANT Unlike typical undermount kitchen sink installations, The Galley Workstation is installed in the cabinet prior to the counter being templated. A support structure, (cleat system of wood frame), will need to be constructed and mounted inside the base cabinet(s) and recessed 1/16" from the top. - Page 7 A support frame (cleat system) will need to be built and installed into the cabinet(s). This frame will support the weight of the Galley Workstation. Note: Clips are NOT to be used. b) Construct the support frame so that the inside dimensions are 1/2"...
-
Page 8: Countertop Installation
YOU ARE NOW READY FOR THE COUNTERTOP FABRICATOR Counter Top Installation Use the white template tray a xed to the Workstation 1. Cover what will be the exposed 1/2” of the front and flanges as your guide for the front to back cut-out. back flanges, and the 1/4“... - Page 9 The Galley Workstation Limited Lifetime Warranty 1. GALLEY WORKSTATION LIMITED LIFETIME WARRANTY - Seller provides a Limited Lifetime Warranty. Seller warrants its stainless steel sink, installed in a residential application, to be free from manufacturing defects in materials and workmanship under normal residential usage.
Need help?
Do you have a question about the Ideal Workstation IWS 7S and is the answer not in the manual?
Questions and answers