Connecting An I.link Optical Disc Drive; To Connect An I.link Optical Disc Drive - Sony VAIO Viao PictureBook Computer User Manual

Connecting an i.LINK Optical Disc Drive

You can use the supplied i.LINK®
i.LINK optical disc drive draws power from the computer through the power
cable that is integrated with the VAIO Computer Peripheral Cable. Use the
i.LINK optical disc drive with your preinstalled software to create CDs and play
DVD movies. See "About the Software on Your Computer" for more
information.
✍
If you connect and use an optional drive when your computer is running on battery
power, the battery life will be shorter.

To connect an i.LINK optical disc drive

1 Close any active applications to help prevent data loss.
2 Turn on power to the computer. Insert the L-shaped plug of the VAIO®
Computer Peripheral Cable (supplied with the i.LINK drive) into the
matching jack on the rear of the i.LINK drive. Secure the plug by turning the
screw on the cable connector clockwise.
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software applications, oper-
ating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other. Refer to the documentation that came with your compati-
ble i.LINK device for information on operating conditions and proper connection. Before
connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
Connecting an i.LINK Optical Disc Drive
*
optical disc drive with your computer. The
53