Thorough Cleaning - Silvercrest SRR 3.7 D5 Operating Instructions Manual

Thorough cleaning

For a thorough cleaning, remove the shaving heads
1) Pull the cutting unit
2) Press the two catches on one of the black shaving head fixtures and,
at the same time, pull this up and out of the cutting unit
in the same way with the other two shaving head fixtures. You
can now disassemble all of the parts (blade, shaving head
3) Clean all parts under running water and then allow them to dry
fully.
4) Replace the cutting unit
each other correctly:
SRR 3.7 D5
off the handset and turn it around.
. Ensure that all of the parts grip into
:
. Proceed
Shaving head
fixture
Blade
Shaving
head
│
GB
).
17 ■