Siemens 7KE6000-8AK/DD Directions For Use Manual page 34

English
Safety
according IEC/EN 61010, part 1
(VDE 0411 part 1)
Overvoltage category
Pollution degree
Fire resistance class of housing
Voltage test (type test)
Signal output vs. power supply
Impulse voltage according to IEC 60255-5 (type test)
Voltage test (routine test)
Signal output vs. power supply
Protection class
for the device
for persons
Warning
The Sync-Transceiver 7KE6000-8AK/L is a build-in device and must
therefore be installed on a switchboard or in a control cabinet. After
installation, it is important that all terminals are properly covered to
prevent accidental contact with energized parts.
Isolation of inputs and outputs
Power supply vs. signal output
Electromagnetic compatibility
Emitted interference according to IEC/EN 61000-6-4
Interference field strength according to EN 55011/CISPR11 Class A
Radio interference voltage according to EN 55011/CISPR11 Class A
Immunity to interference according to IEC/EN 61000-6-2
Interference immunity to electromagnetic fields
according to IEC/EN 61000-4-3
Static electricity discharge
according to IEC/EN 61000-4-2
Fast transients/burst
according to IEC/EN 61000-4-4
Line conducted HF according to IEC/EN 61000-4-6
Impulse voltage/surge according to IEC/EN 61000-4-5
34
Sync-Transceiver
III
2
V0 according to UL94
U = DC 5.2 kV/1 min
5 kV
U = DC 3.1 kV/2 s
IP 40
IP 2x
double or reinforced
10 V/m
8 kV
2 kV
10 V
1 kV transversal test
2 kV longitudinal test
E50417-K1074-C294-A2