Control Panel; Buttons And Functions - Epson ET-M1170 Series User Manual

User's Guide

Control Panel

Buttons and Functions

A
Turns the printer on or off.
Unplug the power cord after checking that the power light is off.
B
Prints a network connection report allowing you to determine the causes of any problems you may have using the
printer on a network. If you need more detailed network settings and connection status, hold this button down for
at least five seconds to print a network status sheet.
C
When a network error occurs, pressing this button cancels the error. Hold this button down for more than five
seconds to perform Wi-Fi auto setup using the WPS push button.
D
Stops the current operation. Cancels paper out errors and paper jam errors.
Hold this button down for five seconds until the
Functions using Button Combinations
+
+
+
+
Printer Basics
Wi-Fi Direct (Simple AP) Setup
Hold down the and
PIN Code Setup (WPS)
Hold down the and buttons simultaneously to start PIN Code Setup (WPS).
Restore Default Network Settings
Turn the printer on while holding down the
settings. When the network settings are restored, the printer turns on and the network status
lights flash alternately.
Prevents changes from being made to Epson Connect and Google Connect Print settings.
P
button flashes to run print head cleaning.
buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
button to restore the default network
13