Restarting Your Clié™ Handheld - Sony PEG-TJ27 CLIE Handbook (primary manual) Operating Instructions Manual

Restarting your CLIÉ™ handheld
Normally, you do not need to reset your CLIÉ handheld. However, if your CLIÉ handheld
does not turn on or respond, performing a soft reset may solve the problem.
To reset your CLIÉ handheld, follow the procedure below.
Performing a soft reset
All records and add-on applications stored on your CLIÉ handheld are retained
even after performing a soft reset.
Gently press the RESET button with the stylus.
The system shuts down and your CLIÉ handheld restarts.
After restarting, you will see on the screen displays "palm POWERED"
followed by "SONY", "CLIÉ", and then the Preferences screen for setting
up the time and date.
Notes
• After the RESET button is pressed, it takes a while before the Preferences
screen is displayed. Do not press the RESET button again while resetting.
• Do not press the RESET button with anything other than the stylus, as a
malfunction may occur.
• Do not press any other buttons when you press the RESET button.
35