Installing A Low-Profile Bracket; Connecting The Network Cable - HPE 561T User Manual

5. Firmly seat the adapter in the PCI Express slot.
NOTE: For 1U type servers, you might need to replace the standard profile bracket with a low profile
bracket. See "Installing a low profile bracket."
6. Install the access panel, and then connect the power cord.

Installing a low-profile bracket

You might have to install a low-profile bracket to complete the product installation. The low-profile bracket
replaces the existing standard profile bracket shipped on the product.
To install a low-profile bracket:
Procedure
1. Remove the standard profile bracket, and then place the low-profile bracket over the connector.
2. Be careful not to damage the connector or bind the low-profile bracket to the connector.

Connecting the network cable

Procedure
1. To secure the cable, plug the cable connector into the RJ-45 port.
2. Ensure that the tab on the plug clicks into position indicating that it is properly seated. For more
information, see UTP cable specifications.
Installing an adapter 9