Troubleshooting - Beko MSH28B Manual

7

Troubleshooting

Oven emits steam when it is in use.
•
It is normal that steam escapes during operation. >>>
Product emits metal noises while heating and cooling.
•
When the metal parts are heated, they may expand and cause noise. >>>
not a fault.
Product does not operate.
•
The mains fuse is defective or has tripped. >>>
necessary, replace or reset them.
•
Product is not plugged into the (grounded) socket. >>>
Oven light does not work.
•
Oven lamp is defective. >>>
•
Power is cut. >>>
necessary, replace or reset the fuses.
Oven does not heat.
•
Might not be set to a certain cooking function and/or temperature. >>>
to a certain cooking function and/or temperature.
•
In models equipped with a timer, the timer is not adjusted. >>>
(In products with microwave oven, timer controls only microwave oven.)
•
Power is cut. >>>
necessary, replace or reset the fuses.
(In models with timer) Clock display is blinking or clock symbol is on.
•
A previous power outage has occurred. >>>
uct and switch it on again.
Consult the Authorised Service Agent
or technician with licence or the
dealer where you have purchased
the product if you can not remedy the
trouble although you have imple-
mented the instructions in this sec-
tion. Never attempt to repair a defec-
tive product yourself.
Replace oven lamp.
Check if there is power. Check the fuses in the fuse box. If
Check if there is power. Check the fuses in the fuse box. If
This is not a fault.
Check fuses in the fuse box. If
Check the plug connection.
Adjust the time.
Adjust the time / Switch of the prod-
This is
Set the oven
23/EN