3
Operating Arc Weld Diagnosis Window
3.6
Changing of Standard Current and Standard Voltage
The data of "AVG. Curr" and "AVG. Volt" are registered to the reference
data.
Current out-of-range mode
For the current out-of-range mode, change "STD. Curr" and "STD. Volt"
when changing the welding conditions. For the current out-of-range
mode, manually change "STD. Curr" and "STD. Volt", or select "Bead No"
again. When selecting the bead number again, the threshold for error, the
output mode, and the signal number are initialized.
3-8
HW1485704
HW1485704
26/42